Maytag Precision Touch Control 700 Guide d'utilisation et d'entretien télécharger pdf (Page 14)

Timer

The timer can be set from one minute (0:01) up to 99 hours

and 59 minutes (99:59).

The timer can be used independently of any other oven

activity. It can also be set while another oven function is

operating.

The timer does not control the oven. It only controls a beeper.

To set the Timer:

1. Press the Timer pad.

• 0:00 lights in the display.

• The colon will flash.

2. Press the More+ or Less- pad until the

correct time appears in the display.

• The colon will continue to flash.

3. Press Timer pad again or wait four seconds.

• The colon continues flashing and the time begins

counting down.

• The last minute of the timer countdown will be displayed

as seconds.

4. At the end of the set time, one long beep will sound.

To cancel the Timer:

1. Press and hold the Timer pad for three seconds.

2. Press the Timer pad and set the time to 0:00.

Locking the Control

and Oven Door

The touchpad controls and oven door can be locked for

safety, cleaning, or to prevent unwanted use. They will not

function when locked.

If the oven is currently in use, the controls and door cannot be

locked.

The current time of day will remain in the display

when the controls are locked.

To lock:

Press and hold the CANCEL and Cook &

Hold pads for three seconds. (Press

CANCEL pad first.)

• LOCK flashes in the display.

To unlock:

Press and hold the CANCEL and Cook & Hold pads for three

seconds. (Press CANCEL pad first.)

• LOCK disappears from the display.

Fault Codes

BAKE or LOCK may flash rapidly in the display to alert you if

there is an error or a problem. If BAKE or LOCK flash in the

display, press CANCEL pad. If BAKE or LOCK continue to

flash, disconnect power to the appliance. Wait a few minutes,

and then reconnect power. If the flashing still continues,

disconnect power to the appliance and call an authorized

servicer.

Baking

To set Bake:

1. Press the Bake pad.

• BAKE will flash.

• 000 will light in the display.

2. Select the oven temperature. The oven

temperature can be set from 170° to 550°. Press

or press and hold the More+ or Less- pad.

• 350° will light when either pad is first pressed.

• Press the More+ pad to increase the temperature.

• Press the Less- pad to decrease the temperature.

3. Press Bake pad again or wait four seconds.

• BAKE will stop flashing and light in the display.

• 100° or the actual oven temperature will display. The

temperature will rise in 5° increments until the preset

temperature is reached.

4. Allow the oven to preheat for 8-15 minutes.

• When the set oven temperature is reached, one long

beep will sound.

• To recall the set temperature during preheat, press the

Bake pad.

5. Place food in the oven.

6. Check cooking progress at minumum cooking time. Cook

longer if needed.

7. When cooking is finished, press

CANCEL pad.

8. Remove food from the oven.

Notes:

• To change the oven temperature during cooking, press the

Bake pad and then the More+ or Less- pad until you

reach the desired temperature.

• To change the oven temperature during preheat, press the

Bake pad twice and then the More+ or Less- pad until

you reach the desired temperature.

• If you forget to turn off the oven, it will automatically turn

off at the end of 12 hours. If you wish to deactivate this

feature, see page 16.

Baking Differences Between Your Old

and New Oven

It is normal to notice some baking time differences between a

new oven and an old one. See Adjusting the Oven Temperature

on page 16.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Maytag Precision Touch Control 700 Guide d'utilisation et d'entretien Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers Maytag Precision Touch Control 700