Maytag W10280467B Manuel d'utilisateur télécharger pdf (Page 8)

Wash Temp

Hot

Some cold water is added to save

energy. This may be cooler than

your hot water heater setting.

Warm

Some cold water may be added,

so this will be cooler than what

your previous washer provided.

Cool - brights/darks

Warm water is added to assist

in soil removal and to help

dissolve detergents.

Cold

Warm water may be added to

assist in soil removal and to help

dissolve detergents.

Suggested Fabrics

Whites and pastels

Durable garments

Heavy soils

Bright colors

Moderate to light soils

Colors that bleed or fade

Light soils

Dark colors that bleed

or fade

Light soils

8. Select cycle modiers

Once you select a cycle, the default settings for that cycle will be

lit. Press the cycle modiers buttons to change the Temperature,

Soil Level, and Spin Speed, if desired.

NOTE: Always read and follow fabric care labels instructions to

avoid damage to your garments.

10. Select Start/Pause/Unlock

to begin wash cycle

Press the Start/Pause/Unlock button to start the wash cycle.

When the cycle has nished, the DONE indicator will light up.

Promptly remove garments after cycle has completed to avoid

odor, reduce wrinkling, and rusting of metal hooks, zippers, and

snaps.

Unlocking the lid to add garments:

If you need to open the lid to add 1 or 2 missed garments, you

may do so during the rst portion of the Sensing step.

Press Start/Pause/Unlock; the lid will unlock once the washer

movement has stopped. This may take several minutes if the load

was spinning at high speed. Then close lid and press Start/Pause/

Unlock again to restart the cycle.

If lid is left open for more than 10 minutes the water will pump out.

WASHER MAINTENANCE

CLEANING YOUR DISPENSER TRAY

IMPORTANT: Dispenser trays are not dishwasher safe.

You may nd laundry product residue leftover in your

dispenser trays. To remove residue, follow this recommended

cleaning procedure:

1. Pull tray out until you feel resistance.

2. Lift up slightly, and then continue pulling out.

3. Wash in warm, soapy water, using a mild detergent.

4. Rinse with warm water.

5. Air dry, or dry with a towel, then place back into slot.

Replace inlet hoses after 5 years of use to reduce the risk of

hose failure. Periodically inspect and replace inlet hoses if

bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker.

WATER INLET HOSES

9. Select cycle options

Select any other cycle options you may wish to add, if not

previously set. Some cycles will automatically add certain

options such as Extra Rinse. These can be turned off,

if desired.

NOTE: Not all options are available with all cycles.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Maytag W10280467B Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Rondelles Maytag W10280467B