Maytag MGC7536WS Installation Manuel d'utilisateur télécharger pdf (Page 10)

If the “low” flame needs to be adjusted:

This cooktop is shipped from the factory with low and high flame

settings adjusted for use with Natural gas.

To set for use with LP, the flame can be adjusted using the

adjustment screw located underneath the control knob.

1. Remove the control knob from valve stem.

2. Remove rubber grommet.

3. Use a small flat-blade screwdriver to turn the adjustment

screw clockwise until tight. Do not overtighten.

4. Replace rubber grommet and control knob.

5. Repeat for remaining burners.

A. Adjustment screw

B. Knob hole (knob removed)

C. Control knob

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Maytag MGC7536WS Installation Manuel d'utilisateur Page 10