Maytag MDB9150AWB Manuel d'utilisateur télécharger pdf (Page 6)

For optimal cleaning and drying

results, hot water is necessary. The

incomingwater temperature should be

120-140o F (49-60° C) to properly acti-

vate the detergent and melt greasyfood

soils.

To check the incoming water temperature,

turn on the hot water faucet nearest the

dishwasherand let it run into a glass in the

sink. Place a candy thermometer in the

glass and check the temperature once it

has stopped rising. If the temperature is

below 120° F (49° C), havea qualifiedper-

son raise the water heater thermostat set-

ting.

Before starting the dishwasher,turn on the

hot water faucet and let it run until the

water ishot. This assures that the initial fill

of water is hot.

Use a detergent designed specifically for

use inan automatic dishwasher.Be sure it

is fresh and stored in a cool, dry place (not

underthe sink).

RECOMMENDEDAMOUNT

Too little detergentresults inpoor cleaning,

hard water filming/spotting and poor dry=

ing. Too much detergent can cause per-

manent etching/cloudiness,

The amount of detergent to use is deter-

mined by the hardness of the water and

soil level of the load. Referto the following

chart for detergent usage recommenda-

tions.

Do not use detergent with Rinse Only.

Leave the detergent lid openwhen running

Rinse Only,

In extremely hard water conditions (13

grains per gallon or more*), it is difficultto

achieve good results with any dishwasher.

A mechanical water softener may be nec-

essary to improve water quality, detergent

Soft (0-4 gpg) Light Soil 5 teaspoons

Normal Soil 6 teaspoons

Heavy Soil 8 teaspoons

Medium (5-9 gpg) Light Soil 7 teaspoons

Normal Soil 8 teaspoons

Heavy Soil I0 teaspoons

Hard (10-12 gpg) Light Soil 9 teaspoons

Normal Soil I0 teaspoons

Heavy Soil 12 teaspoons

effectiveness, and protect the dishwasher

parts from the damage that hard watercan

cause.

*Your local water utility or state universi-

ty extension service can tell you the

degree of water hardness in your area.

** Add recommended amount of deter-

gent to either side of the Main Wash

compartment.

Regular use of a rinse aid improves

drying, reduces spotting and filming,

and reduces moisture left on the dish-

washer interior.

An automatic rinse aid dispenser is locat-

ed next to the detergent cups. The win-

dow next to the dispenser cap indicates

when the rinse aid reservoir needs to be

refilled. When the level of rinse aid is

below the indicatormarks and the window

is nearly clear, it is time to refill the dis-

penser. Checkthe dispenser monthly,

To add rinse aid to the dispenser, turn the

cap counterclockwise to open. Remove

the cap and pour liquid rinse aid into the

opening. The amount of rinse aid dis-

pensed during the cycle is adjustable by

movingthe lever inside the reservoirarea.

Use setting "1" for soft water. Adjust it up

to the "MAX"settingfor hardwater, Set the

lever anywherebetweentheseamounts as

needed. Replacethe cap andturn it clock-

wiseto close.

5

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Commentaires sur ces manuels

Pas de commentaire