Maytag MGR5751BDW Instructions d'exploitation télécharger pdf (Page 8)

GENERAL USER INFORMATION- PD & PN models

BLANK DISPLAY – This condition indicates the appliance is inoperative. Enter set-up mode to view

iagnostic code.

“0 MINUTES” SHOWING IN DISPLAY – This condition indicates the appliance cannot be operated. Coins

dropped during this condition will be stored in escrow but cannot be used until normal operation is restored by

opening and closing the lid.

COLD START (initial first use) – Appliance is programmed at the factory as follows:

Washer

10 minute wash period (11 minutes for low-water models)

1 rinse and 1 minute of rinse agitation (2 minutes rinse agitation for low-water models)

1.75 wash price (PD models)

0.00 wash price (PN models)

WARM START (after power failure) – After a delay of up to 8 seconds, the appliance is restored to the state

that existed at time of the power failure.

PRICING – After the lid is opened following the completion of a cycle, the display indicates the cycle price

(unless set for free operation). As coins are dropped the display will change to lead the user through the

initiation of a cycle.

FREE CYCLES – This is established by setting the cycle price to zero. When this happens “SELECT

CYCLE” will appear rather than a cycle price.

DISPLA

Y –

After the unit has been installed and plugged in, the display will show “0 MINUTES”. Once the

unit has been plugged in and the washer lid opened the display will show the price. In washers set for free

cycles the display will flash “SELECT CYCLE”.

WHITES COLORS

BRIGHT

COLORS

PERMANENT

PRESS

WOOLENS

DELICATES

AND KNITS

WHITES COLORS

BRIGHT

OLORS

PERMANENT

PRESS

WOOLENS

DELICATES

AND KNITS

WHITES COLORS

BRIGHT

COLORS

PERMANENT

PRESS

FABRIC SETTINGS

DELICATES

AND KNITS

*SMALL

LOAD

LOW-WATER MODELS

CONTROL SET-UP PROCEDURES

IMPORTANT:

READ

ALL

INSTRUCTIONS BEFORE OPERA

TING!

The lower fabric setting key pads and the digital display are used to set up the controls. The display can

contain 4 numbers and/or letters and a decimal point.

These are used to indicate the set-up codes and

related code values available for use in programming the appliance.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

Maytag MGR5751BDW Instructions d'exploitation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers Maytag MGR5751BDW