Maytag MDE25PN Spécifications télécharger pdf (Page 9)

REVERSINGTHEDOORSWING

Door swing can be changed from a right-side opening to left-side

opening, if desired.

Place a towel or soft cloth on top of the dryer or work space

to avoid damaging the surface.

5. Rotate outer door 180 °.

Remove 3 of the 4 screws that hold the door hinge on the

front panel of the dryer. Partially loosen the remaining screw

with keyhole opening and lift the door off the screw.

Loosen

screw

with

keyhole

opening

A. Dryer front panel

B. Door assembly

Lay the door assembly on a previously prepared flat surface

with the inside (inner door assembly) facing up.

Remove the 6 Phillips-head screws to release the outer door

assembly from the inner door assembly, as indicated below.

See illustration. It is important that you remove only the 6

indicated screws.

4. Lift the inner door assembly off the outer door assembly.

Use a small flat-blade screwdriver to remove 2 plug strips

from the inner door. Slide the head of the screwdriver under

the plugs, being certain not to scratch the inner door surface.

Lift up.

Remove the 4 screws that attach to the inner door hinge

and move the hinge to the other side. Reinstall the 4 screws.

Door hinge

3. Reinstall plug strips on opposite side of the inner door.

4. Check for fingerprints on the glass. Clean glass if necessary.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Pas de commentaire

Maytag MDE25PN Spécifications Page 9