Maytag MDB7749SAM0 Spécifications télécharger pdf (Page 21)

Connect wires black to black and white to white, using UL

Listed/CSA Approved twist-on wire connectors (not included).

If needed, see website for animated representation of this step.

Visit www.maytag.com/electrical under FAQ tab.

Tighten strain relief screws to secure cable.

_ Direct Wire--Reinstall 1

terminal box cover

Place wires inside terminal box. Insert tabs on left side of cover.

Make sure wires are tucked inside box. Close cover ensuring

wires are not pinched. Use V4"nut driver or Torx®T20 ®screwdriver

and previously removed screw to secure cover.

Secure Dishwasher in Cabinet Openin 9

Check that dishwasher is still level front-to-back and side-to-side

in cabinet opening.

Open dishwasher door, remove lower dish rack, and place towel

over pump assembly and lower spray arm of dishwasher. This will

keep screws from falling into pump area when you are securing

the dishwasher.

NOTE: Do not drop screws into bottom of dishwasher.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Pas de commentaire

Maytag MDB7749SAM0 Spécifications Page 21